Electrical SERVICES
RCD Safety Switches in Sydney & Sutherland Shire
Protect your home from electric shock with fast, compliant RCD installation and testing.
RCD safety switches protect your home by cutting power in milliseconds during electrical faults. CGF Electrical installs, upgrades and tests safety switches across Sutherland Shire and Sydney to keep your home safe, compliant and future ready.
Is Your Home Missing Its Most Important Safety Device?
An RCD safety switch is the one thing standing between your family and a serious electric shock. It detects faults and cuts the power in milliseconds , faster than a heartbeat. But not all homes have them and many that do are running outdated units that no longer meet Australian Standards. CGF Electrical installs, upgrade and test RCD safety switches across Sutherland Shire, Sydney. If your board needs a single new unit or complete circuit protection, our licensed electricians make sure your home is safe, compliant and properly covered.
What Is an RCD Safety Switch?
What Is an RCD Safety Switch?
An RCD (Residual Current Device) constantly monitors the flow of electricity through a circuit. If it detects current leaking to earth, such as through a person or faulty wiring, it shuts off power in under 0.03 seconds. That’s fast enough to save a life. A standard circuit breaker protects appliances and wiring from overloads. An RCD protects people from electric shock. You need both. Under AS/NZS 3000, RCD protection is now mandatory on all residential final sub circuits, including power points, lighting and wet areas. From 1 May 2023, Type AC RCDs can no longer be installed in Australia. Only Type A or Type B units meet current requirements.
Signs Your Home May Need RCD Protection
Signs Your Home May Need RCD Protection
Many older homes across Sydney still operate without proper safety switch protection.
You may need RCD installation or upgrades if:
- Your switchboard still uses ceramic fuses
- You do not have safety switches installed
- Circuits trip frequently
- Your home has outdated wiring
- You are renovating or upgrading appliances
- Your switchboard has not been updated in years
If you are unsure if your home has adequate RCD protection, our electricians can inspect your switchboard and recommend the safest solution for your property.
What a CGF Electrical RCD Installation Includes
What a CGF Electrical RCD Installation Includes
- Full switchboard inspection , We check your entire board before we quote, identifying any outdated or missing safety switches.
- Type A RCD or RCBO installation , Only compliant, high quality units that meet AS/NZS 3000 requirements.
- Complete circuit testing , Every RCD is tested under load to confirm correct tripping time and current.
- Type AC replacement , We replace outdated Type AC RCDs that are no longer compliant for new installations.
- Full compliance , Your installation meets current Australian Wiring Rules, including circuit labelling and site cleanup.
Why Homeowners Trust CGF Electrical for RCD Switches
Why Homeowners Trust CGF Electrical for RCD Switches
- Only Type A gear , We don't install outdated Type AC units. Your safety comes first.
- Licensed and insured , Fully compliant with NSW electrical regulations.
- Clean, labelled switchboards , Every circuit clearly marked so you know exactly what's what.
- Honest advice, plain English , We explain what you need and why, without the jargon or upsells.
Service Areas
Service Areas
We provide RCD safety switch installation and testing across Sutherland Shire, Sydney, including:
- Sutherland Shire
- Eastern Suburbs
- Inner West
- North Shore
- Northern Beaches
- Bayside
- Surrounding suburbs
FAQs RCD Safety Switches in Sydney & Sutherland Shire
What's the difference between a circuit breaker and an RCD?
A circuit breaker protects appliances and wiring from overloads and short circuits. An RCD protects people from electric shock. They look similar on your switchboard but serve completely different purposes. You need both.
How many RCDs does my home need?
Under AS/NZS 3000, all final sub circuits in residential installations require RCD protection, power points, lighting and wet areas. A typical home needs multiple RCDs or RCBOs to cover every circuit. We’ll assess your board and recommend exactly what’s needed.
Can you test my existing RCDs?
Yes. Regular testing is essential; RCDs can fail over time, especially if they haven’t been tripped for months. We recommend testing every three months using the TEST button, plus a professional inspection every two years.
Are old Type AC RCDs still legal?
Existing Type AC RCDs don’t need to be removed immediately but they can no longer be installed in new or altered circuits. If you’re adding a new circuit, upgrading your switchboard or doing any significant electrical work, Type AC units must be replaced with Type A
Do you offer emergency RCD repairs?
Yes. If your safety switch won’t reset, you hear buzzing from the board or you notice burning smells, call us immediately. We provide urgent RCD repairs and replacement across Sydney.
Get in touch.
Enter your details and one of our team will be in touch within 24 hours — for electrical work, security work, or both.
Quick Links
- Home
- About Us
- Services
- Projects
- Contact Us
Security Services
- CCTV & Camera Systems
- Alarm Systems
- Intercom Systems
- Access Control
- Smoke Detectors
- Site Security & Lighting
Electrical Services
- Residential Electrical
- Switchboard Upgrades
- Commercial Electrical
- Maintenance & Repairs
- Solar, Battery & EV
- Home Automation & Data
Contact Us
- 0483 948 781
- info@cgfsecurityandelectrical.com.au
- First Floor, 1B/25 Captain Cook Dr, Caringbah NSW 2229, Australia